-40%
Solar Powered Home Garden Irrigation Controller Moisture Sensor Based Outdoor
$ 167.17
- Description
- Size Guide
Description
This controller controls irrigation based on real time moisture samples, which are the final results of all weather and plant water absorption conditions. Keeps the soil moisture in the set range to optimize irrigation and plants growth. User sets Dry/Wet control moisture levels according to experience or calibrated measurements, then the controller will auto open valve at Dry level and auto close valve at Wet level to keep the soil moisture constantly in the ideal range. The Dry/Wet control levels are adjustable. The valve included is a 1-Inch magnetic latching valve, optionally up to 3-Inch magnetic latching valves. The screen shows Dry, Current and Wet control levels one by one. And valve status. The controller is solar powered, features low power consumption design which can operate greater than 15 days during cloudy days, also can be used inside the greenhouse. User sets and adjusts forbidden irrigation time, so no irrigation during 9:00am to 5:00pm for convenience. Great for garden and small green house auto irrigation. Can install with any existing or new, drip or sprinkler irrigation system, it replaces the existing valve with a low power latching valve.Features:
1.
Moisture sensor based irrigation to optimize irrigation and plants growth.
2. Two control modes for choice: Moisture sensor based control and timer control.
3. Two timer control modes: timer mode 1, Users can set the interval time of irrigation and irrigation cycle two groups of time to control irrigation; timer mode 2, users can set seven days, three groups of different timing irrigation time every day.
4. Under moisture mode, the max irrigation time limit can be set to prevent unexpected watering.
5. Solar powered for environment protection, convenience and save installation and maintenance money
6. Control latching valve up to 3-Inch
7. Build in clock for setup Non irrigation period for convenience.
8. User can install pressure meter/switch after valve to check the valve open/close.
9. Very Reliable
Standard package:
Moisture sensor(1) +Solar controller(1)+ 1" Plastic latching valve(1)+7.2V, 2300mAh(1)
Application: