-40%

Vostok lap timing system - MRT, AMB DP, Mylaps rc3, Mylaps rc4 hybrid compatible

$ 517.43

Availability: 100 in stock
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • Model: Timing system v.3
  • Country/Region of Manufacture: Lithuania
  • Brand: vostokelectronics

    Description

    This timing system works with all our transponders. Also works with MRT, AMB DP, Mylaps RC3; MylapsRC4
    hybrid
    Supported software:
    RCGarage (best free online software),
    Zround (free),
    Laps free (free) - only through USB,
    Flip Sider racing (free),
    RCM (Beginner version is free) / Ultimate,
    bbkRC,
    RCSP,
    Live Time RC - Issue: 10 sec delay on race start.
    Works with "AMM converter" free Android app - for direct data reading through Wifi.
    Decoder has following features:
    FastEthernet interface
    Wifi interface
    RS232 support
    Audio out for headphones
    Any polarity, any 7-12V 2A power source for all conditions.
    We produce very sensitive signal amplifier, which allows to use loop up to 2x18m (36m) long, especially for boat modelers
    This timing system
    does not work with Mylaps RC4 transponders
    .
    Lap timing system is non-professional, designed for small / medium events or private use. Timing system works fine with 97-98% above mentioned transponders. After long testing period, we have 2-3% of transponders which didn't work for unknown reasons. So if you use this Timing system for the event, please have few spare working transponders.
    System is designed for the timing and scoring an RC models / go-karts / motorsport events. The signal from each transponder in the RC model / go-kart is caught by the detection loop installed on the track surface or above water (for RC boat models). Decoder is compatible with the same "passive" loop, which uses AMB 20, Mylaps RC3 and etc. timing systems. The loop is connected via "black box" to decoder. Decoder transmit data to connected computer
    . Each transponder has a unique number, which enables decoder to identify particular RC model / kart on the track.
    When you order lap timing system, you will receive:
    1. Decoder
    2. 2x5m detection loop with termination resistor
    3. Termination resistor with short 2x30cm cables, for your own loop (for rc boat, kart racers)
    4. 8m or longer coaxial cable
    5. ~220V-12 VDC adapter for decoder. You can always use your AC/DC any polarity 7-12V 2A adapter for power
    6. VDC connection cable for decoder power from car 12V plug
    7. VDC connection cable with free ends for decoder power from battery (you can use 2S-3S LiPo or 12V Pb battery)
    8. Ethernet connection cable; USB connection cable.
    9. USB flash/CD with user manual, drivers, and other third party free lap timing software.
    We guarantee that any items manufactured by us are fully tested and working well. As you have free access to PCB, change and tune any options, we can?t give you any warranty. If Lap Timing System burns out, or faults we can repair this equipment for reasonable price. Our goal is not to double profit from the client. If you have any questions please contact us. In period of 1 year from selling the system, we can offer you to buy a new device for a special price, if it is not possible to repair.
    Feel free, and ask me any questions!